86-0769-22327568
4/F, Block B, Ruilian Zhenxing Industrial Park, Xinhe Ind. Area, Jianshazhou, Wanjiang District, Dongguan, Guangdong, China (Mainland)
♦ HALL angle: 180° | ♦ Wide speed control range of 150-20000rpm |
| Driver parameters | Minimum value | Rated value | Maximum value | unit |
| Output current | 1 | 15 | 25 | A |
| Input voltage | 18 | 48 | 50 | VDC |
| Hall drive current | - | 20 | - | mA |
| Hall signal voltage | 4.5 | 5 | 5.5 | V |
| Applicable motor speed | 0 | - | 20000 | RPM |
| Environmental factors | Environmental indexes |
| Use occasion | Avoid dust, oil stain and corrosive gas |
| Operating temperature | 10℃~+50℃ |
| Environment humidity | 40-90%RH (no condensation) |
| Vibration | 5.9m/s2 Max |
| Storage temperature | -20℃~+125℃ |
| Cooling mode | Natural cooling or forced cooling |
Terminals | Function |
| SV | 1.External potentiometer; 2.nput analog signal; 3.PWM pulse width. |
| COM | Common port (0V reference level) |
| F/R | Motor rotation direction control(CW/CCW). High level input the motor will rotates clockwise, low level input or when F/R and COM are short circuit, the motor rotate anticlockwise |
| EN | High level input the motor stops, low level input or when EN and COM are short circuit, the motor runs |
| BRK | The motor brake stops when a high level is added or port suspension; the motor runs when the low level is added or EN and BRK are connected |
ALM | The default output signal is 5V under normal circumstances; the level is 0V when malfunction occurs |
| SPEED | Output pulse frequency signal(OC). The motor speed can be calculated through SPEED. |
Rotate the RV knob clockwise until a “click” sound, |  |
Use a suitable potentiometer with a resistance value |  |
Voltage and motor speed relational diagram(unloaded)  |
Voltage and motor speed relational diagram(unloaded)  |
Duty radio and motor speed relatoinal diagram (unloaded)  |
BRK and COM are connected in default, the motor |  |
Connect F/R and COM, the motor will rotate |  |
Equipped with a motor protection function, the driver provides options to set desired current number in the P-sv knob to avoid over-current for motor. Please note that the random error is ±10% . The setting should be matched with motor rated current. |
 click the link for more information. |
