2 phase stepper motor driver 6a, cnc kit stepper motor nema 34 driver
Product Description
Features
♦ Low noise and compact ♦ Pulse, direction, enable 5~24V input ♦ Automatic idle current reduction(50%) ♦ Maximum input pulse frequency: more than 2MHZ | ♦ Microstep emulation to provide smooth motion ♦ Double pulse input control or pulse&dir control ♦Over-voltage, over-current and less-voltage self-protection |
Indexes
Electrical indexes
Driver parameters | Minimum value | Rated value | Maximum value | unit |
Output current | 2.4 | - | 7.2 | A |
Input voltage | 18 | 70 | 80 | VAC |
Input Pulse Width | 250 | | 5E+8 | ns |
Input Pulse Frequency | 1 | | 500K | V |
Input signal voltage | 3.6 | 5 | 24 | VAC |
Environmental indexes
Environmental factors | Environmental indexes |
Use occasion | Avoid dust, oil stain and corrosive gas |
Operating temperature | 10℃~+50℃ |
Environment humidity | 40-90%RH (no condensation) |
Vibration | 5.9m/s2 Max |
Storage temperature | -20℃~+125℃ |
Cooling mode | Natural cooling or forced cooling |
Driver interface and wiring diagram
Item | Function |
PUL+(+5V ) | Pulse control signal: effective pulse falling edge, pulse voltage of 5V-24V, maximum frequency of 500KHZ. |
PUL-(PUL) |
DIR+(+5V) | Direction control signal(5-24V), which controls the forward and reverse direction of the motor. |
DIR-(DIR) |
ENA+(+5V) | Motor free signal: When effective(high level 5-24V), motor is in free state. It is used for motor debugging. |
ENA-(ENA) |
AV1 | Power supply 18-80V |
AV2 |
A+.A- | Motor phase A |
B+.B- | Motor phase B |
Control signal connection
Common anode
Common cathode
Function
Status indication and operating parameter setting
Current setting
The current is set through SW1, SW2, SW3 dial switches.
Current | SW1 | SW2 | SW3 |
2.4A | off | off | cff |
3.1A | on | off | off |
3.8A | off | on | off |
4.5A | on | on | off |
5.1A | off | off | on |
5.8A | on | off | on |
6.4A | off | on | on |
7.2A | on | on | on |
Half current locking
Automatic idle current reduction to reduce heat after motor stops moving for 0.1 second if SW4 is set “off”.
Subdivision setting
The subdivision value is set through SW5, SW6, SW7 and SW8 dial switches, and a total of 16 subdivision settings are optional.
Subdivision(p/rev) | SW5 | SW6 | SW7 | SW8 |
200 | on | on | on | on |
400 | off | on | on | on |
800 | on | off | on | on |
1600 | off | off | on | on |
3200 | on | on | off | on |
6400 | off | on | off | on |
12800 | on | off | off | on |
25600 | off | off | off | on |
1000 | on | on | on | off |
2000 | off | on | on | off |
4000 | on | off | on | off |
5000 | off | off | on | off |
8000 | on | on | off | off |
10000 | off | on | off | off |
20000 | on | off | off | off |
25000 | off | off | off | off |
Mechanical dimension
If you are interested in our products, please click the link to send Inquiry and agree to share your Business Card to us. We will reply to you as soon as possible.
about us
Company introduction
Certification
Our Services
Donsultation
1. Email service, promise to reply your inquiry within 12h;
2. Support skype, trade manager, QQ etc online chat mode.
Technical Service
Before purchase:Before purchase: Our professional engineers will puts forward concrete solving plans according to your design drawings or equipment videos, they will help with all the consultation during model selection.
After purchase: If the equipment has mechanical failure, such as revolving speed, etc, we will provide technical support until the equipment works well.
quality garantee
From the delivery date, you will have one year warranty for product quality.
Delivery details
1.Carton box with foam
2.Box can be customized as you require
3.Usually ready goods and stock within 7-30 days after receiving the payment.
If you are interested in our products, please click the link to send Inquiry and agree to share your Business Card to us. We will reply to you as soon as possible.